A glass fireplace screen with doors is a framed glass assembly built to your fireplace opening. The critical choice is the glass itself: tempered glass, rated to roughly 400-500°F, suits masonry fireplace doors mounted on the face of the opening; ceramic glass, rated to roughly 1,300-1,400°F, is required for wood stoves and inserts where the glass sits in the fire’s direct heat path.
You can now request pricing and availability directly from us—just let us know what you need, and we’ll take care of the rest.
Spec | Options |
|---|---|
Glass type, the safety decision on this page | Tempered glass: approximately 400-500°F continuous service temperature. Appropriate for masonry fireplace doors mounted on the *face* of the opening, used per the manufacturer’s instructions which for most masonry door sets means doors open while a fire is burning. Ceramic glass (the Neoceram / Robax family): approximately 1,300-1,400°F, with a near-zero coefficient of thermal expansion. Required for wood stoves, fireplace inserts, gas inserts, pellet stoves and any application where the glass sits in the direct heat path or is closed against an active fire. This is not an aesthetic or budget choice it is a fire-safety decision. |
Thickness | Tempered fireplace door glass: typically 3/16in (5mm) or 1/4in (6mm). Ceramic stove and insert glass: typically 3mm or 5mm, matched to the existing channel and gasket. Ceramic is thinner than people expect its performance comes from the material, not the gauge. |
Tint options | Clear (maximum fire view, shows soot fastest), smoked/bronze (warms the firelight, hides a dark cold firebox when not in use), gray/smoke gray (the most neutral way to hide an unlit firebox). Tints are readily available in tempered. Ceramic glass is generally supplied clear, often with a faint amber cast; assume tint is not available in ceramic unless we confirm it for a specific panel. |
Frame material & finishes | Steel and aluminium frames, and cast or extruded brass. Finishes: matte black, oil-rubbed bronze, brushed nickel, polished or antique brass, textured/hammered black, and pewter. On Cape Cod, powder-coated steel and solid brass outlast plated finishes in salt air near the water, plated nickel and chrome are the first things to pit. Ask for stainless fasteners. |
Mesh options | Hanging mesh curtains on a top track (drawn by hand or by a pull chain), fixed mesh spark panels, or a mesh-only screen with no glass. Mesh in black, bronze, brass and stainless. Stainless mesh is the right call in a salt-air second home that sits unheated over the winter. |
Maximum span / size range | Custom door sets are commonly built anywhere from roughly 24in to 60in wide and 20in to 40in high, with larger openings possible in a bi-fold or multi-panel configuration. Very wide openings may need a centre post. |
Mounting | Overlap fit (frame overlaps the masonry face the forgiving option) or inside fit (frame set inside the opening needs a square opening). Masonry anchors into the firebox jambs or the surrounding face; lintel clamps where the frame hangs from the lintel. |
Air control | Some door sets include adjustable air inlets at the base. These control combustion air, not smoke. They do not change the requirement to keep the damper open while a fire is burning, and they do not make a tempered door set safe to close on an active fire. |
Gaskets & hardware | Fibreglass rope gasket at the glass channel on stoves and inserts (replace it whenever the glass is replaced). Door handles, latches and magnetic catches in the same finish family as the frame. |
Standards & governing authority | Manufacturer instructions and the local building or fire official govern this installation. Massachusetts and Cape Cod towns enforce chimney, hearth-extension and clearance requirements that vary in interpretation; nothing on this page overrides your installation instructions or your inspector. |
Â
Start with where the glass sits, not with how it looks. If the glass will be mounted on the face of an open masonry fireplace and used according to the manufacturer’s instructions open while the fire burns, closed once it has burned down to embers to stop warm room air disappearing up the flue tempered glass at 400-500°F is the correct and standard specification, and you should pair it with a mesh curtain so something is containing sparks during the burn.Â
If the glass will be part of a wood stove, a fireplace insert, a gas insert or a pellet stove, or if it will ever be closed against an active fire, it must be ceramic glass rated to roughly 1,300-1,400°F; tempered glass in that position will fail, and it is the single most common and most dangerous mistake in this category.Â
For the frame, choose bi-fold on wide openings or where furniture crowds the hearth, and cabinet doors where you have swing room and want the heavier traditional look. For mounting, assume overlap fit on any older Cape Cod fireplace until measurements prove the opening is genuinely square.
We’re more than just a supplier—we design, fabricate, and install a full range of custom glass solutions.
You can now request pricing and availability directly from us—just let us know what you need, and we’ll take care of the rest.
Latest Post Categories Shower Enclosure Glass Wine Cellar Glass Windows Glass Shelves Glass Storefronts Glass Railings Glass Partitions Glass Entrances Keypoints: Glass fireplace screens offer a sleek, modern alternative to traditional mesh covers—enhancing both safety and aesthetics in living spaces. Tempered, heat-resistant glass ensures durability and protection while showcasing the…
Custom glass installation offers a sleek, tailored solution that enhances both the aesthetic and functionality of any space. From boosting property value to providing durable, low-maintenance features, it’s a smart investment for homeowners and businesses alike.
Latest Post Categories Shower Enclosure Glass Wine Cellar Glass Windows Glass Shelves Glass Storefronts Glass Railings Glass Partitions Glass Entrances Selecting the right glass for your project can significantly impact the aesthetics, functionality, and safety of your space. Whether you’re renovating your home, designing a new office, or creating a…
Join our mailing list for updates, tips, and inspiration on custom glass solutions—straight to your inbox.
Hyannis,Barnstable, Boston, Bourne, Brewster, Chatham, Dennis, Eastham, Falmouth, Harwich, Mashpee, Orleans, Providence, Provincetown, Rhode Island, Sandwich, Truro, Wellfleet, Yarmouth — and all of Barnstable County, Massachusetts.
Powered by Digital Services Master Copyright © 2024. All rights reserved
